Safety Precautions For Rollover Protection
- Always disconnect the voltage supply whenever working on the rollover protection.
- Make sure no one is standing near the rollover protection when reconnecting the battery. Stand at least one meter away.
- Always remove the rollover protection when performing any body repairs near the rollover protection.
- After servicing the body in the rollover protection area, check the body for welding spatter, deformations and chafe marks (compare with opposite side of vehicle if necessary).
- Always install rollover protection in the vehicle as soon as it is removed from the packaging (new part).
- Never leave rollover protection unattended.
- The rollover protection may not be disassembled or repaired. Always use new parts.
- A rollover protection may not be reinstalled if it has fallen on a hard surface or if it shows any signs of damage.
- Do not perform any repair work on the convertible top compartment cover near or on the rollover protection cover.
- If the rollover protection system is damaged in an accident, replace it with a new part.