Rear Lid Drive Unit -VX69- /Rear Lid Drive Unit 2 -VX77-, REMOVING AND INSTALLING: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following.

Do not hold the rear lid drive unit on the cable when installing.
The rear lid being completed must be guided by hand, since the rear lid drive unit can destroy the rear lid when the weight is too low.
The ball sockets on the rear lid drive unit must not strike the ball pins, but rather they must be placed at an angle and be pressed on with a rotational movement.

-- Perform an adaptation. Refer to Rear Lid Drive Unit -VX69- /Rear Lid Drive Unit 2 -VX77-, PROGRAMMING .