LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (General, Technical Data (Suspension, Wheels, Steering)) >> 00 General, Technical Data >> Repair Information >> Threshold "A" In Mm

Threshold "A" In Mm

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

If the readout value is greater than the threshold "a" (table value): insufficient damping effect → replace shock absorber.

If the readout value is less than the threshold "a" (table value): sufficient damping effect → shock absorber does not need to be replaced.

Chassis Version Front Axle Rear Axle Note
1BL   in production in production No load tank full tire pressure "partially loaded"
1BQ   in production in production
1BA   43 52
1BA High-voltage system 44 48
       
1BV   44 52
2MF   43 52
1BK   in production in production
1BL   in production in production
2MB   in production in production