After-Run Coolant Pump -V51-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi SQ5 and 2023 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
-- Install the engine cover and heat shield. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .
-- Disconnect the connector -3-.
-- Remove the double bolts -2-.
-- Remove the hose clamps -arrows- and remove the After-Run Coolant Pump -V51- with bracket.
-- Remove the bolts -1- and remove the pump from the bracket.