LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Bumpers (87)) >> 63 Bumpers >> Rear Bumper >> Bumper Cover Lower Section, Removing And Installing >> Bumper Cover Lower Section, Removing And Installing >> Removing

Bumper Cover Lower Section, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Equipped on some models: pry up the clamp -2- at the same time do not destroy the tab -1-.

GWWA63-11297Courtesy of AUDI

-- Release the retainers in the direction of -arrows- and remove the bumper cover lower section -4- from the bumper cover -3-.

-- Place the bumper cover lower section on a soft surface.



-- Remove the bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Release the retainers -arrows- and remove the lower section -1- from the bumper cover -2-.

GWWA63-11357Courtesy of AUDI