Rear Seat Belt Anchor In Center Seating Position, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the bench seat. Refer to BENCH SEAT, REMOVING AND INSTALLING .
-- If equipped, disconnect and free up the seat belt switch connector -2-.
-- Remove the nut -3-.
-- Remove the belt end fitting -4- with the seat belt latch -1-.
-- Remove the clip -5- and remove the belt end fitting.
Belt End Fitting, Removing, Single Seats
-- Remove the left single seat. Refer to SINGLE SEATS, REMOVING AND INSTALLING .
-- Remove the bolt -1-.
-- Disengage and remove the belt end fitting -2- from the seat frame.