Sunroof Shade Motor -V260-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the C-pillar trim panel on the driver side. Refer to C-PILLAR TRIM PANEL, REMOVING AND INSTALLING .
-- Remove the roof end strip. Refer to the appropriate Service Information. .
-- Remove the D-pillar trim panels. Refer to D-PILLAR TRIM PANEL, REMOVING AND INSTALLING .
-- Open the sun shade completely.
-- To avoid dirtying the headliner, clean the :T40233 .
-- Push the :T40233 between the frame -1- for the panorama tilting sunroof and the headliner.
-- Using the :T40233 , loosen the headliner all the way around the frame for the panorama tilting sunroof -arrows-.
-- Disconnect the connector -1-.
Remove the bolt -arrow- and the Sunroof Shade Motor -V260-.