BELT PULLEY (WITHOUT A/C Clutch -N25-), REMOVING AND INSTALLING, A/C COMPRESSOR "Denso" MANUFACTURER VERSION "2": Notes

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Information about replacing the belt pulley. Refer to OVERVIEW - A/C COMPRESSOR BELT PULLEY, "Denso" VERSION "2" .

Fig 1: Identifying Drive Plate, Belt Pulley, And Circlip
Courtesy of AUDI OF AMERICA, LLC
The belt pulley is made of plastic and is sensitive to impact, therefore be especially careful when handling it.
If the drive plate overload protection -C- has triggered, the drive plate can be pried off of the belt pulley -D- after removing the circlip -A-
To optimize noise reduction, a circlip -A- with a vulcanized rubber disc is installed. Refer to OVERVIEW - A/C COMPRESSOR BELT PULLEY, "Denso" VERSION "2" and the Parts Information.