LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 341 (Wheels, Tires, Wheel Alignment (Wheel Tire Guide - Temporary Spares)) >> 44 Wheels, Tires, Wheel Alignment >> Legal And Technical Requirements (Documents) >> Certificate Of Conformity (EG Certificate Of Conformity)

Certificate Of Conformity (EG Certificate Of Conformity)

WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

The vehicle manufacturer must request an EU type approval for all passenger vehicles (vehicle class M1).

A certificate of conformity is produced based on this type approval.

This document confirms that the vehicle conforms to the EU operating license and is registered in every EU country without the need for individual approval.

The issuing applies to all vehicles that were produced in accordance with the EU operating license.

These vehicles have an EU type plate (black sticker) in the driver door area or in the engine compartment on older vehicles.

The certificate of conformity has the same importance as the certificate of registration, so the original should not be kept in the vehicle.

In the certificate of conformity additional technical data and all permitted wheel/tire combinations are listed.