Side Adjustment at Striker:
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Loosen the nuts -2-.
-- Move the striker -1- toward -a arrows-.
- Use the markings on the striker -1- and on the body for the side adjustment.
- During the closing test, the lid must fall from the balance position into the latches and engage completely.
-- Tighten the nuts.
Tightening Specifications
- Refer to OVERVIEW - HOOD