Vehicle Electrical System Control Module -J519-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
LHD vehicle
-- Remove the driver side instrument panel cover. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .
Continuation for all vehicles
-- Remove the A-pillar lower trim panel. Refer to A-PILLAR TRIM PANEL, REMOVING AND INSTALLING .
-- Release the retainer -1-.
-- Pull the vehicle electrical system control module -2- slightly downward.
-- Release and disconnect the connectors -3, 4 and 5-.
-- Remove the vehicle electrical system control module downward from the mount -6- and pivot backward.