Cover And Cushion, Removing And Installing, Rear Bench Seat: Installing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Remove the mounting grommets from the rear seat frame.
-- Check the rear seat frame near the mounting grommets for deformities.
-- Push the new mounting grommets into the rear seat frame until they engage audibly.
-- Install the rear bench seat and push the wire hooks into the mounting grommets.
-- Make sure the wire hooks are engaged correctly in the grommets.