Center Seat Frame Trim Panel, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear bench seat cover and cushion. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, REAR BENCH SEAT .
-- If possible, position the 2/3 rear seat as far forward as possible using the forward/back adjustment.
-- Remove the center cushion -2-. Refer to CENTER CUSHION, REMOVING AND INSTALLING, BACKREST WITH PASS-THROUGH .
-- Remove the expanding rivet -1-.
-- Loosen the trim panel -1- with the Trim Removal Wedge:3409 and remove -direction of arrow A-.
-- Release the rear seat backrest and fold it forward.
-- Remove the trim panel -1- upward from the seat frame -direction of arrow A-.