Sill Panel Trim, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Versions with Illuminated Sill Panel:
-- Remove the front sill panel. Refer to SILL PANEL, REMOVING AND INSTALLING .
-- Lift the carpet slightly and disconnect the connector -3-.
-- Free up the wire by slightly pulling the seal -2- away from the body flange.
Continuation for All Vehicles:
-- Carefully warm up the sill panel trim -1- using the :VAG1416 .
-- Carefully pry the sill panel trim from the side sill -arrow- using the :3409 . Do not damage the paint coat while doing so.