Roof Rack Recognition Sensor -G625-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the roof railing. Refer to ROOF RAILING, REMOVING AND INSTALLING .
-- Release and disconnect the connector -5- and remove the wiring harness.
-- Remove the seal -1-.
-- Release the catches -2 and 4- through the openings -arrows- and remove the sensor -3-.