LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Hood, Lids (Fy)) >> 55 Hood, Lids >> Rear Lid >> Rear Lid Closing Assist Motor -V382-, REMOVING AND INSTALLING >> Removing

Rear Lid Closing Assist Motor -V382-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the rear lid lower trim panel. Refer to REAR LID LOWER TRIM PANEL, REMOVING AND INSTALLING .

-- Disengage the cable bracket -7- to do so release the catches -A arrows-.

GWWA55-11177Courtesy of AUDI

-- Disengage the cable nipple -5- on the operating lever -4-.

-- Disconnect the connector -3-.

-- Release the catches -2, 6 and 8- 90° clockwise -arrow B-.

-- Remove the Rear Lid Closing Assist Motor -V382- -item 1-.