Height Adjustment at Striker:
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Install the adjusting buffer completely. Refer to HEIGHT, ADJUSTING USING ADJUSTING BUFFER .
-- Loosen the clip -2- by removing.
-- Adjust the striker -1- by turning the adjusting screw -3- -arrows-.
- During the closing test, the lid must fall from the balance position into the latch and engage completely.
-- Adjust the striker height if necessary.
-- Push the clip back on the striker.