INPUT SHAFT SEAL, REPLACING, 0D3 "quattro sport": Notes

WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Puller - Multiple Use:VW 391

Fig 1: Puller - Multiple Use VW391
Courtesy of AUDI
Puller - Unit Injector:T10055

Fig 2: Identifying Puller T10055
Courtesy of AUDI
-2- Puller - Unit Injector - Adapter 2:T10055/2
Two M 8 x 30 Bolts
Seal Installer - Hollow Shaft:T10380

Fig 3: Identifying Thrust Piece - T10380-
Courtesy of AUDI
Seal Installer - Input Shaft:T40222

Fig 4: Assembly Tool T40222
Courtesy of AUDI
Guide Sleeve:T40222/1
Sealing Grease:G 052 128 A1
Inductive Heater:VAS 6414

Fig 5: Identifying Inductive Heater VAS 6414
Courtesy of AUDI
or
Commercially Available Hotplate and Digital Thermometer:VAS 6519

Fig 6: Identifying Digital Thermometer VAS 6519
Courtesy of AUDI