HYDRAULIC CONTROL UNIT, REMOVING AND INSTALLING, 0D3 "quattro sport" AND 0BX "quattro sport": Installing
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
- Replace the seal between the hydraulic control unit -1- and the final drive housing.
- The centering pins OVERVIEW - HYDRAULIC CONTROL UNIT 0D3 AND 0BX must be installed inside the housing for the hydraulic control unit.
- The left -6- and right -7- lines must be installed loosely when attaching the hydraulic control unit -1-.
- The bolt -2- must be installed with a seal.