LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 281 (Final Drive, Differential - Rear Final Drive) >> 39 Final Drive, Differential >> Final Drive >> Final Drive, Disassembling And Assembling >> Driveshaft Speed Sensor -G970-, REMOVING AND INSTALLING, 0B0 "quattro ultra", 09R "quattro ultra" >> Removing

Driveshaft Speed Sensor -G970-, REMOVING AND INSTALLING, 0B0 "quattro ultra", 09R "quattro ultra": Removing

WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect the connector on the Driveshaft Speed Sensor -- -1-.

GWWA39-10864Courtesy of AUDI

-- Remove the bolt -arrow- and then remove the Speed Sensor --.

GWWA39-10854Courtesy of AUDI
scientia non olet · About LEMON Manuals