Heater And A/C Unit, Removing And Installing, Pr Number KH5/ 9AU/ 9AE: Installing
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Check the grommets -B-, -C-, and -F- for damage and proper seating.
-- Check the retaining points -A- for correct installation in the center tunnel and for damage.
-- Check the ball heads on air distribution housing -D-, which are inserted in retaining points -A-, for damage.
-- Check the outlets at the rear air distribution housing -D-, which are inserted in the air ducts -E-, and the air ducts -E- for damage and contamination.
-- Insert the rear air distribution housing -D- into the retaining points -A- and air ducts -E-.
-- Perform a basic setting for the A/C system. Refer to GENERAL INFORMATION AND PROCEDURES FOR REMOVING AND INSTALLING ADJUSTMENT MOTORS .