Air Intake Housing From Heater And A/C Unit, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front heater and A/C unit. Refer to HEATER AND A/C UNIT, REMOVING AND INSTALLING .
-- Remove the insulation from the air intake housing -C-. Refer to OVERVIEW - HEATER AND A/C UNIT .
-- Mark the connector to the actuators on the air intake housing and remove. Refer to OVERVIEW - ACTUATORS ON AIR INTAKE HOUSING .
-- Mark the routing of the wiring harness -A- on the air intake housing -C- (or take a picture) and remove from the air intake manifold.
-- Remove the bolts -B-.
-- Disconnect the air intake housing -C- from the heater and A/C unit evaporator housing -D-. Refer to OVERVIEW - HEATER AND A/C UNIT .