Fresh Air Intake With Water Drain, Removing And Installing, Version 1: Removing
WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the fresh air intake cover. Refer to FRESH AIR INTAKE COVER, REMOVING AND INSTALLING, VERSION 1 .
-- Move the Exterior Air Quality and Humidity Sensor -G935- / Air Quality Sensor -G238- with the Humidity Sensor in Fresh Air Intake Duct -G657- to the side (do not disconnect the connector). Refer to Exterior Air Quality and Humidity Sensor -G935- /Air Quality Sensor -G238- WITH THE Humidity Sensor in Fresh Air Intake Duct -G657-, REMOVING AND INSTALLING .
-- Pull the inner cover -1- in the direction of the -arrow- out of the fresh air intake -2-.
-- Remove the nuts -arrows-.
-- Remove the fresh air intake -1- from the fresh air intake -2- and remove.