, Removing
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.
-- Remove the left railing trim panel. Refer to OVERVIEW - D-PILLAR TRIM PANEL .
First the bracket with the LTE Antenna 2 -R306- is removed.
-- Release and disconnect the connector -3-.
-- Press the tabs -arrows- and remove the bracket -2- with LTE Antenna 2 -R306- -1-.
Remove the LTE Antenna 2 -R306- from the bracket.
-- Remove the lower tab -arrow A- on the bracket -2- and remove the LTE Antenna 2 - R306- -1- in the direction of -arrow B- from the bracket -1-.
LTE Antenna 2 -R306-, Installing
Install in reverse order of removal.