Transmission Fluid Cooling Pump -V478-, REMOVING AND INSTALLING, VEHICLES WITHOUT AUXILIARY RADIATOR FOR TRANSMISSION FLUID COOLER: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7 and 2023 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
-- Remove the right upper subframe shield. Refer to SUBFRAME SHIELD, REMOVING AND INSTALLING .
-- Remove the bolts -2- and remove the heat shield -1-.
Fig 1: Component Location - Transmission Fluid Cooling Pump -V478-, Vehicles Without Auxiliary Radiator for Transmission Fluid Cooler
-- Disconnect the connector -7-.
-- Remove the nuts -4-.
-- Place a cloth underneath to catch any escaping coolant.
-- Disconnect and remove the coolant hoses -5 and 9- with Hose Clamps - Up To 25mm :3094 , to do this, loosen the hose clamps -6 and 8-.
-- Remove the Transmission Fluid Cooling Pump -V478- -item 10- with the bracket -3-.
-- Remove the bolts -arrows- and disconnect the Transmission Fluid Cooling Pump -- from the bracket -3-.