Transmission Fluid Cooling Pump -V478-, REMOVING AND INSTALLING, VEHICLES WITH AUXILIARY RADIATOR FOR TRANSMISSION FLUID COOLER: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7 and 2023 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the left front wheel housing liner front section. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .
-- Disconnect the connector -7-.
Fig 1: Component Location - Transmission Fluid Cooling Pump -V478-, Vehicles with Auxiliary Radiator for Transmission Fluid Cooler
-- Place a cloth underneath to catch any escaping coolant.
-- Disconnect the coolant hoses -2 and 3- with Hose Clamps - Up To 25mm :3094 .
-- Loosen the hose clamps -4 and 5- and detach from the Transmission Fluid Cooling Pump -V478- -item 6-.
-- Remove the bolts -arrows- and disconnect the Transmission Fluid Cooling Pump -- from the bracket -8-.