Coolant Recirculation Pump -V50-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7 and 2023 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front right wheel housing liner front section. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .
-- Disconnect the connector -2-.
-- Place a cloth underneath to catch any escaping coolant.
-- Disconnect and remove the coolant hoses with Hose Clamps - Up To 25mm :3094 , to do this, loosen the hose clamps -1-.
-- Remove the bolts -3- and remove the coolant pump.