Transmission Fluid Cooling Valve -N509-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7 and 2023 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front left wheel housing liner front section with wheel spoiler. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .
-- Loosen the hose clamps -arrows- on the left and right sides and remove air duct hose -1- (example image).
-- Disconnect the connector -10-.
Fig 1: Component Location - Transmission Fluid Cooling Pump -V478-, Vehicles with Auxiliary Radiator for Transmission Fluid Cooler
-- Place a cloth underneath to catch any escaping coolant.
-- Remove the coolant hoses -2 and 12- with the Hose Clamps - Up To 25 mm : 3094 and disconnect it from the Transmission Fluid Cooling Valve -N509- to do so loosen the hose clamps -1 and 13-.
-- Remove the bolts -11- and then remove the Transmission Fluid Cooling Valve -N509-.