Transmission Coolant Valve -N488-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2024 Audi SQ7 and 2023 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the left upper subframe shield. Refer to SUBFRAME SHIELD, REMOVING AND INSTALLING .

-- Remove the rear noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Remove the heat shield boot.

Fig 1: Transmission Fluid Cooling Valve -N509- Component Location

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -2-.

-- Remove the bolts -arrows-.

-- Place a cloth underneath to catch any escaping coolant.

-- Disconnect and remove the coolant hoses with Hose Clamps - Up To 25mm :3094 , to do this, loosen the hose clamps -1-.

-- Remove the Transmission Coolant Valve -N488-.