Map Controlled Engine Cooling Thermostat -F265-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7 and 2023 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
Preliminary work may be required depending on the model. Refer to COOLANT PUMP/COOLANT THERMOSTAT .
-- Disconnect the connector -2-.
-- Remove the bolts -arrows- and the Map Controlled Engine Cooling Thermostat -F265- -item 1-.
-- Dismount the seal -2- with the extractor lever -2-.