HOUSING FOR Map Controlled Engine Cooling Thermostat -F265-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2024 Audi SQ7 and 2023 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Replace the seals, O-rings and connecting piece after removing.
-- Install the oil dipstick guide tube OVERVIEW - BELT PULLEY SIDE SEALING FLANGE => List Item:Oil Dipstick Tube .
There may be additional procedures depending on the model. Refer to COOLANT PUMP/COOLANT THERMOSTAT Housing for Map Controlled Engine Cooling Thermostat -F265-.