LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 201 (Cooling System (6-Cylinder Direct Injection 3.0L 4V TFSI Engine Ea839)) >> 19 Cooling System >> Coolant Pump/Coolant Thermostat >> Map Controlled Engine Cooling Thermostat -F265-, REMOVING AND INSTALLING >> Removing

Map Controlled Engine Cooling Thermostat -F265-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2024 Audi Q7 and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Remove the upper air duct pipe. Refer to AIR DUCT PIPE, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and remove the left front coolant pipe from the coolant pump.

GWWA19-12531Courtesy of AUDI

All additional procedures are described. Refer to MAP CONTROLLED ENGINE COOLING THERMOSTAT -F265-, REMOVING AND INSTALLING .