Coolant Recirculation Pump -V50-, REMOVING AND INSTALLING, AUDI Q8, AUDI Q7 FROM PRODUCT IMPROVEMENT: Removing
WARNING: This page is about a different car, the 2024 Audi Q7 and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front right wheel housing liner front section. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .
-- Disconnect the connector -2-.
-- Loosen the hose clamps -1-, then clamp off the coolant hoses with the Hose Clamps - Up To 25mm:3094 and remove them.
-- Remove the bolts -3- and remove the coolant pump.