Front Belt End Fitting, Removing And Installing, USA And CANADA Market-Specific: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front sill panel. Refer to FRONT SILL PANEL, REMOVING AND INSTALLING .
-- Remove the belt anchor from the bracket.
-- Open the cover -2- for the belt anchor -1- with a screwdriver on the catches -arrow-, open and push aside.
-- Push together the catches on the clamp with a plies -A arrows-.
-- At the same time push the anchoring pins -2- together with the clamp -3- to release in the direction of -arrow B-.
-- Disengage the anchoring pins from the clamp in the belt end fitting -1-.
-- Remove the bolt -1- and then remove the belt relay -2-.