Side Adjustment at Striker:
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Loosen the nuts -1 and 3-.
-- Move the striker -2-.
- Use the markings on the striker -4- and on the body -5- for the side adjustment.
- During the closing test, the hood must fall from the balance position into the latch and engage completely.
-- Tighten the nuts.
Tightening Specifications
- Refer to OVERVIEW - HOOD