Height Adjustment at Striker:
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Install the adjusting buffer completely. Refer to HEIGHT, ADJUSTING USING ADJUSTING BUFFER .
-- Loosen the clip -2- by removing.
-- Adjust the striker -1- by turning the adjusting screw -3- -arrows-.
- During the closing test, the hood must fall from the balance position into the latch and engage completely.
-- Adjust the striker height if necessary.
-- Push the clip back on the striker.