Center Bumper Cover Mount, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- If equipped, free up the wiring harness -2-.
-- If equipped, disconnect the connector on the garage door opener control module.
-- Remove the nuts -arrows-.
-- Remove the center mount -1-.