Overview - Bumper Cover, S Line Before Product Improvement

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Overview - Rear Reflector. Refer to OVERVIEW - REAR REFLECTOR
Overview - Covers and Air Guides. Refer to OVERVIEW - COVERS AND AIR GUIDES

Fig 1: Exploded View Of Front Bumper Cover (S Line)

Courtesy of AUDI

End Panel
- The bumper cover
- Removing and Installing. Refer to BUMPER COVER END PLATE, REMOVING AND INSTALLING .
Towing Eye Cover
Air Duct
- Center
- Removing and Installing. Refer to CENTER AIR DUCT, REMOVING AND INSTALLING, S LINE, BEFORE PRODUCT IMPROVEMENT .
Bolt
- Quantity: 4
- 2 Nm
Cap
- For the air intake grille
- Equipped on some models
- Removing and Installing. Refer to AIR INTAKE GRILLE CAP, REMOVING AND INSTALLING, BEFORE PRODUCT IMPROVEMENT .
Mount
- For the bumper cover
- To secure the headlamp
- Removing and Installing. Refer to BUMPER COVER MOUNT, REMOVING AND INSTALLING .
Side Cap
- For the air intake grille
- Equipped on some models
- Removing and Installing. Refer to AIR INTAKE GRILLE CAP, REMOVING AND INSTALLING, BEFORE PRODUCT IMPROVEMENT .
Nut
- Quantity: 5
- 4 Nm
Cover
- For the side air duct
- Removing and Installing. Refer to SIDE AIR DUCT, REMOVING AND INSTALLING, S LINE, BEFORE PRODUCT IMPROVEMENT .
Side Air Duct
- Removing and Installing. Refer to SIDE AIR DUCT, REMOVING AND INSTALLING, S LINE, BEFORE PRODUCT IMPROVEMENT .
Bolt
- 2.5 Nm
Bumper Cover
- Removing and Installing. Refer to BUMPER COVER, REMOVING AND INSTALLING .
Washer Nozzle Cover
- For the headlamp washer system
- Removing and Installing. Refer to HEADLAMP WASHER SYSTEM WASHER NOZZLE COVER, REMOVING AND INSTALLING .
Bolt
- Quantity: 8
- 2 Nm