Overview - Bumper Carrier, Equipment Version
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Air Duct Front Section
- Right
- Clipped into the rear section air guide
- Bumper Carrier
- Removing and Installing. Refer to BUMPER CARRIER, REMOVING AND INSTALLING .
- Air Duct Rear Section
- Right
- Air Duct Rear Section
- Left
- Bolt
- For securing the bumper carrier to the lock carrier
- 4.5 Nm
- Bolt
- Quantity: 4
- 60 Nm
- Air Duct Front Section
- Left
- Clipped into the rear section air guide
- Bracket
- For the Outside Air Temperature Sensor -G17-
- Equipped on some models
- Removing and Installing. Refer to Outside Air Temperature Sensor -G17- BRACKET, REMOVING AND INSTALLING .
- Outside Air Temperature Sensor -G17-
- Removing and Installing. Refer to OUTSIDE AIR TEMPERATURE SENSOR -G17-, EMOVING AND INSTALLING .