Depending on the version, the following additional work procedures are required

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Adjust the adaptive cruise control. Refer to Adaptive Cruise Control (ACC) .

Note the conditions here for a required adjustment of the adaptive cruise control (ACC).

-- Calibrate the night vision system camera. Refer to INFRARED SYSTEM, CALIBRATING .

Note the conditions here for a required calibration of the Night Vision System Camera -R212-.

-- Calibrate the Front Peripheral Camera -R243-. Refer to Peripheral Camera .

Note the conditions here for a required calibration of the Front Peripheral Camera -R243-.

-- When replacing, removing and installing the bumper cover or paint work int he area of the radar sensors: calibrate the front corner radar. Refer to FRONT CORNER RADAR, CALIBRATING .

Tightening Specifications

Refer to OVERVIEW - BUMPER COVER