LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 149 (Communication (Infotainment System - Online Services)) >> 91 Communication >> Antenna Systems >> Bumper Antennas, Removing And Installing >> Bumper Antennas, Removing And Installing, From Product Improvement >> Removing

Bumper Antennas, Removing And Installing, From Product Improvement: Removing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.

-- Remove the rear bumper cover spoiler. Refer to .

-- Release and disconnect the connector -5-.

GWWA91-13334Courtesy of AUDI OF AMERICA, LLC

-- Remove the nut -3- for the bumper antenna -1-.

-- Remove the bumper antenna -1- from the bracket -4-.

-- If necessary, remove the nuts -2- and then remove the bracket -4- from the body.