INPUT SHAFT SEAL, REPLACING, 0DB, 0D2, 0G2, 09R "quattro ultra", 0B0 "quattro ultra": Notes

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Puller - Multiple Use:VW 391

Fig 1: Puller - Multiple Use VW391
Courtesy of AUDI
Slide Hammer Set - Adapter 40:VW 771/40 from the Slide Hammer Set:VW 771

Fig 2: Identifying Slide Hammer Set
Courtesy of AUDI
Puller - Unit Injector:T10055

Fig 3: Identifying Puller T10055
Courtesy of AUDI
Seal Installer - Hollow Shaft:T10380

Fig 4: Identifying Thrust Piece - T10380-
Courtesy of AUDI
-2- Puller - Unit Injector - Adapter 2:T10055/2
Guide Sleeve:T40222/1

Fig 5: Assembly Tool T40222
Courtesy of AUDI
Inductive Heater:VAS 6414

Fig 6: Identifying Inductive Heater VAS 6414
Courtesy of AUDI
or
Commercially Available Hotplate with Digital Thermometer:VAS 6519

Fig 7: Identifying Digital Thermometer VAS 6519
Courtesy of AUDI
Used Oil Collection and Extraction Unit:SMN372500

Fig 8: Identifying Used Oil Collection And Extraction Unit
Courtesy of AUDI
Sealing Grease:G 052 128 A1
Two M 8 x 30 Bolts