INPUT SHAFT SEAL, REPLACING, 0BX "quattro sport": Notes

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Press Piece - Multiple Use:VW 431

Fig 1: Identifying Thrust Pad 16.5/28 mm Dia. VW 431
Courtesy of AUDI
Puller - Unit Injector:T10055

Fig 2: Identifying Puller T10055
Courtesy of AUDI
-2- Puller - Unit Injector - Adapter 2:T10055/2
Seal Installer - Hollow Shaft:T10380

Fig 3: Identifying Thrust Piece - T10380-
Courtesy of AUDI
Seal Installer - Propshaft:T40247

Fig 4: Identifying Assembly Tool T40247
Courtesy of AUDI
Guide Sleeve:T40247/1
-1- Two-Arm Puller:VAS251001

Fig 5: Identifying Special Tools - Kukko 20/10 Puller Set
Courtesy of AUDI
Inductive Heater:VAS 6414

Fig 6: Identifying Inductive Heater VAS 6414
Courtesy of AUDI
or
Commercially Available Hotplate and Digital Thermometer:VAS 6519

Fig 7: Identifying Digital Thermometer VAS 6519
Courtesy of AUDI
Used Oil Collection and Extraction Unit:SMN372500

Fig 8: Identifying Used Oil Collection And Extraction Unit
Courtesy of AUDI
Sealing Grease:G 052 128 A1