LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2022 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (Final Drive, Differential (Rear Final Drive)) >> 39 Final Drive, Differential >> Final Drive >> Final Drive, Disassembling And Assembling >> Driveshaft Speed Sensor -G970-, REMOVING AND INSTALLING, 0B0 "quattro ultra", 09R "quattro ultra" >> Removing

Driveshaft Speed Sensor -G970-, REMOVING AND INSTALLING, 0B0 "quattro ultra", 09R "quattro ultra": Removing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect the connector on the Driveshaft Speed Sensor -- -1-.

GWWA39-10864Courtesy of AUDI

-- Remove the bolt -arrow- and then remove the Speed Sensor --.

GWWA39-10854Courtesy of AUDI
scientia non olet · About LEMON Manuals