Driveshaft Speed Sensor -G970-, REMOVING AND INSTALLING, 0B0 "quattro ultra", 09R "quattro ultra": Installing
WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Insert the Speed Sensor -- -2- and tighten the bolt -3-. Tightening specification OVERVIEW - FINAL DRIVE, DISASSEMBLING AND ASSEMBLING, 0B0 "quattro ultra", 09R "quattro ultra".
-- Connect the connector -1-.