Sliding Bar Ball, Installing

WARNING: This page is about a different car, the 2024 Audi Q5 and 2023 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Camshaft Spacer:T40191

Fig 1: Camshaft Spacer T40191
Courtesy of AUDI OF AMERICA, LLC
Protective Eyewear

Installing

Fig 2: Inserting Spring And Ball Into Camshaft

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

Risk of injuring the eyes due to the sliding bar ball springing out.

- Wear protective eyewear.

-- Insert the spring -1- in the camshaft.

-- Place the ball -2- on the spring in the camshaft.

-- Push the ball and spring downward in -direction of arrow A- using the Camshaft Spacer:T40191/1 and hold.

-- Push the sliding bar -3- in the -direction of arrow B-.