Bearing Bracket, Removing And Installing: Removing

-- Remove the upper timing chain cover. Refer to UPPER TIMING CHAIN COVER, REMOVING AND INSTALLING .

TIP:

Fig 1: Removing Control Valve

Courtesy of AUDI OF AMERICA, LLC

The control valves have left-hand threads.

-- Remove the left and right control valve using the Assembly Tool:T10352/2  -item 1- clockwise -arrow-.

-- Vibration damper, version 1. Refer to Fig 2: to do so, use the Wrench - 21mm:T40263  , Adapter:T40314  and 24mm socket to counterhold the vibration damper.

Fig 2: Vibration Damper - Versions

Courtesy of AUDI OF AMERICA, LLC

Fig 3: Using T40263 & T40314

Courtesy of AUDI OF AMERICA, LLC

-- Vibration damper, version 2. Refer to Fig 2: counterhold the crankshaft at the vibration damper using a offset open-end wrench 24 mm.

Fig 4: Vibration Damper - Versions

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 through 6-.

Fig 5: Bearing Bracket (With Aluminum Bolts) Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

• Carefully remove the bearing mount, without tilting.

-- Remove the bearing bracket and the spacer.