Generator -C- RIBBED BELT, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi A8 Quattro, 2023 Audi A8 Quattro, and 2022 Audi A8 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Depending on the model, preliminary work may be required. Refer to RIBBED BELT, REMOVING AND INSTALLING .
-- Remove the A/C compressor ribbed belt from the vibration damper. Refer to A/C COMPRESSOR RIBBED BELT, REMOVING AND INSTALLING .
CAUTION:
Risk of destroying a used ribbed belt by reversing the running direction.
- Mark the running direction before removal.
- Pay attention to the running direction when reinstalling.
-- To release the tension of the ribbed belt -2-, pivot the tensioner counter-clockwise -arrow- using the Screwdriver Insert Torx T55: VAS 5350/8 -3-.
-- Remove the ribbed belt -1- and release the tension on the tensioner.