Cylinder Bank 1 (Right) Camshaft Housing, Removing And Installing: Removing
WARNING: This page is about a different car, the 2024 Audi A8 Quattro, 2023 Audi A8 Quattro, and 2022 Audi A8 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the right coolant pipe from the longitudinal member. Refer to RIGHT COOLANT PIPE ON LONGITUDINAL MEMBER, REMOVING AND INSTALLING .
-- Loosen the hose clamp and disconnect the hose -1- for the EVAP system.
-- Close the open lines and connections with carefully cleaned plugs from the Engine Bung Set: VAS 6122 .
All other procedures are described under: CAMSHAFT HOUSING, REMOVING AND INSTALLING .