Roller Bearing, Replacing: Installing

Courtesy of AUDI OF AMERICA, LLC

-- Position the correct side of the adapter on the roller bearing.

• The bevel -arrow- faces toward the roller bearing and specifies the installation depth.

-- Align the Adapter : T40395/3  .

Courtesy of AUDI OF AMERICA, LLC

• The side without the bevel -arrows- faces down.

-- Install the front roller bearing -1- and the rear roller bearing -2- in all the way using the Spindle: T40395/1  , Adapter: T40395/2  and Adapter: T40395/3  by turning the Nut: T40395/4  .

Courtesy of AUDI OF AMERICA, LLC

• The labeled sides of the roller bearing face toward the outside.

-- Install the balance shaft. Refer to BALANCE SHAFT, REMOVING AND INSTALLING .

-- Install the crankshaft. Refer to OVERVIEW - CRANKSHAFT .